ASE technicians
Preventative maintenance
Engine diagnostics
alignments
Brakes
Sitemap
Click for directions
Click here for valuable coupons offered by Vistoso Automotive
You are at Vistoso Automotives services page
Click here to read more about Vistoso Automotive
Click here to return to Vistoso Automotives home page
Click here to contact Vistoso Automotive
Vistoso Automotive complete auto repair
Preventative maintenance
Engine oil lubricates and removes heat from internal engine components. The oil filter removes harmful deposits from the engine oil, preventing them from being circulated throughout the engine.
Manufacturers differ in their recommended guidelines for when engine oil and oil filters should be changed. As a general rule, however, engine oil should be changed every 3,000 miles to keep the engine healthy and to prolong its life.



12945 North Oracle Road, Oro Valley, Arizona 85739
Diagnostics
Today, most cars are controlled by computers. The fuel injectors, the spark plugs, the steering system and more are all told when to fire and when to move by an onboard computer system.
If something’s going wrong with your car or engine, your onboard computer can tell you about it. If the computer senses something is wrong with one of your car’s systems, it will turn on a dashboard light, like “ABS Brakes” or something less specific, like “Check Engine.”

Telephone: (520) 468-7171
Alignments
Wheel alignment is part of standard automobile maintenance that consists of adjusting the angles of the wheels so that they are set to the car maker's specification. The purpose of these adjustments is to reduce tire wear, and to ensure that vehicle travel is straight and true (without "pulling" to one side).The primary angles are the basic angle alignment of the wheels relative to each other and to the car body.
Brakes
Brake pad material wears out over time. Brake pads should be periodically inspected for wear, which is highly variable depending on vehicle weight and driver habits. Brake pads must be replaced before the friction material is worn away completely. If it isn't, metal-to-metal contact will occur between the brake rotor and the worn-out brake pad. If metal-to-metal contact occurs, the brake rotor will be damaged, and it will need to be resurfaced or replaced.
Services
* Oil change and lube
* Brakes and brake repair
* Tires and tire repair
* Steering and suspension
* Batteries, starting & charging
* Mufflers and exhaust
* Engine cooling systems
* Climate control
* Fleet services
* Factory recommended services
* Warranty repairs
Copyright Vistoso Automotive 2011
Telephone: (520) 468-7171
Website design by Raymond Owens web design